Ski-Doo RTX22 ETEC Pdf 2022 Handbuch
Ski-Doo RTX22 ETEC Pdf · 2022 · Handbuch · 261 Seiten
Technische Daten
Die vollständige Datei wird vom Bot geliefert.
Anzugsdrehmoment
Die vollständige Datei wird vom Bot geliefert.
| Artikel | Wert | Passt auch | PDF-Seite |
|---|---|---|---|
| Transmission | 16 ± 1.02 N·m | 142 in·lb | p. 52 |
| Transmission | 15 ± 1 N·m | p. 52 | |
| Water pump cover | 11 ± 0.8 N·m | p. 59 | |
| Bearing carrier screws | 5 ± 0.34 N·m | 44 in·lb | p. 64 |
| Taptite screws | 6 ± 0.7 N·m | p. 64 | |
| Coolant hose clamp | 5.5 ± 0.45 N·m | 49 in·lb | p. 66 |
| CPS retaining screws | 8 ± 0.45 N·m | 71 in·lb | p. 70 |
| Retaining screw | 125 ± 9 N·m | p. 74 | |
| Magneto housing | 7 ± 0.5 N·m | p. 75 | |
| Starter mounting screws | 11 ± 0.8 N·m | p. 80 | |
| SERVICE PRODUCT screw | 2.7 ± 0.68 N·m | 24 in·lb | p. 80 |
| Retaining nut | 4 ± 0.3 N·m | p. 93 | |
| RAVE valve housing | 10 ± 0.7 N·m | p. 97 | |
| Collar nuts | 4 ± 0.34 N·m | 35 in·lb | p. 98 |
| Bracket | 20 ± 2 N·m | p. 99 | |
| RAVE cable lock nut | 20.3 ± 1.36 N·m | 15 ft·lb | p. 99 |
| Counter nut | 20 ± 2 N·m | p. 99 | |
| Snap ring | 20.3 ± 1.36 N·m | 15 ft·lb | p. 99 |
| RAVE cable lock nut | 5 ± 0.6 N·m | p. 99 | |
| Retaining plate screw | 5 ± 0.56 N·m | 44 in·lb | p. 99 |
| REED VALVES Reed valve blade screws | 1.5 ± 0.3 N·m | p. 106 | |
| Intake adapter retaining | 6 ± 0.4 N·m | p. 107 | |
| SEQUENCE Cylinder Block Base Gasket | 50 ± 1.5 N·m | p. 113 | |
| Cylinder block screws | 50.2 ± 1.36 N·m | 37 ft·lb | p. 131 |
| Oil seal cover screws | 11 ± 0.79 N·m | 97 in·lb | p. 144 |
| M8 Crankcase screws | 29.8 ± 1.36 N·m | 22 ft·lb | p. 158 |
| Oil catch tank screw | 7.5 ± 1.02 N·m | 66 in·lb | p. 179 |
| Oil pump screw | 1.8 ± 0.23 N·m | 16 in·lb | p. 180 |
| Retaining ring | 25 ± 1 N·m | p. 187 | |
| Wave shim support retaining screws | 24.4 ± 1.36 N·m | 18 ft·lb | p. 187 |
| Retaining ring | 11 ± 0.79 N·m | 97 in·lb | p. 187 |
| Fuel hose retainer screw | 5 N·m | 44 in·lb | p. 217 |
| Adapter plate clamps | 0.7 ± 0.1 N·m | p. 224 | |
| Throttle body clamps | 1.5 ± 0.02 N·m | 13 in·lb | p. 224 |
| TPS retaining screw | 4 ± 0.45 N·m | 35 in·lb | p. 226 |
| Spark plug | 23 ± 1.36 N·m | 17 ft·lb | p. 234 |
| Ignition coil retaining | 2.4 ± 0.2 N·m | p. 237 | |
| Ground cable screw | 8 ± 0.45 N·m | 71 in·lb | p. 244 |
| Knock sensor screw | 24.4 ± 1.36 N·m | 18 ft·lb | p. 256 |
Dokument beziehen
Die vollständige Datei wird vom Bot geliefert.
In Telegram öffnen — der Bot findet dieses Dokument anhand seiner Katalog-ID und sendet die Datei.
Im Bot öffnen- Offizielle kostenlose Ski-Doo-BedienungsanleitungenTeilekatalogAlle Handbücher