Ski-Doo 2006 Manual
Ski-Doo · 2006 · manual · 502 pages
Technical data
Numbers below were extracted automatically from the document. Verify them against the original manual before you order parts or apply torque.
Tightening torque
Values extracted from the document text. Check against the original before service work.
| Item | Value | Also | PDF page |
|---|---|---|---|
| Engine support bolts | 48 N·m | 35 ft·lb | p. 81 |
| Intake socket bolts | 22 N·m | 16 ft·lb | p. 107 |
| Rail retaining nuts | 10 N·m | 89 in·lb | p. 272 |
| Voltage regulator/rectifier screws | 5 N·m | p. 305 | |
| Large terminal nut | 7 N·m | 62 in·lb | p. 316 |
| Ground cable connecting bolt | 11 N·m | p. 316 | |
| Seat stud screws | 10 N·m | 89 in·lb | p. 325 |
| Retorque bolt | 95 N·m | 70 ft·lb | p. 335 |
| Pin | 10 N·m | 89 in·lb | p. 342 |
| Locking nuts | 10 N·m | 89 in·lb | p. 346 |
| Castellated nut of upper sprocket | 60 N·m | 44 ft·lb | p. 365 |
| Sprocket hub faces toward chaincase | 60 N·m | 44 ft·lb | p. 371 |
| Er sprocket screw threads | 48 N·m | p. 371 | |
| Shock upper and lower nut | 19.5 N·m | 173 in·lb | p. 391 |
| Adjuster lock nut | 19 N·m | 168 in·lb | p. 392 |
| Stopper straps nuts (on Summit strap adjuster) | 21 N·m | 15 ft·lb | p. 392 |
| Stopper strap(s) nuts | 11 N·m | 97 in·lb | p. 392 |
| Locking ring set screw | 2.5 N·m | 22 in·lb | p. 392 |
| Slider shoe nut | 2.5 N·m | 22 in·lb | p. 394 |
| Stopper strap nuts | 11 N·m | 97 in·lb | p. 396 |
| Rear arm shock upper nut | 19.5 N·m | 173 in·lb | p. 396 |
| Throttle rod upper nut | 19.5 N·m | 173 in·lb | p. 396 |
| Stopper strap nuts (on Summit strap adjuster) | 21 N·m | 15 ft·lb | p. 397 |
| Pivot arm lower nut | 24.5 N·m | 18 ft·lb | p. 409 |
| Pivot arm/runners nut | 25 N·m | 18 ft·lb | p. 422 |
| Retighten 4 nuts | 5 N·m | 44 in·lb | p. 444 |
| Magneto ring nut | 105 N·m | 77 ft·lb | p. 469 |
| M6 N.A. Crankcase nuts or screws | 22 N·m | 16 ft·lb | p. 469 |
| Crankcase/engine support nuts or screws | 40 N·m | 30 ft·lb | p. 469 |
| Cylinder head screws | 22 N·m | 16 ft·lb | p. 469 |
| Magneto ring nut | 125 N·m | 92 ft·lb | p. 477 |
| Crankcase nuts or screws | 29 N·m | 21 ft·lb | p. 477 |
| Crankcase/engine support nuts or screws | 35 N·m | 26 ft·lb | p. 477 |
| Cylinder head screws | 29 N·m | 21 ft·lb | p. 477 |
| Crankcase/cylinder nuts or screws | 40 N·m | 30 ft·lb | p. 477 |
| Exhaust manifold nuts or bolts | 22 N·m | 16 ft·lb | p. 482 |
| Axial fan shaft nut | 35.3 N·m | 26 ft·lb | p. 482 |
Spark plugs
Values extracted from the document text. Check against the original before service work.
| Item | Value | Also | PDF page |
|---|---|---|---|
| Spark plug | 0.2 mm | p. 102 | |
| Spark plug | 0.4 mm | p. 120 | |
| Spark plug | 1 mm | p. 132 | |
| YT4L-BS | — | p. 286 | |
| BR9ECS | — | p. 301 | |
| BR9ES | — | p. 465 |
Get the document
The full file is delivered by the bot. Free owner guides for Ski-Doo are also available from the manufacturer.
Open in Telegram — the bot finds this document by its catalog id and sends the file.
Open in bot- Official free Ski-Doo owner's manualsParts catalogueAll manuals