BRP Defender Traxter HD10 Owner's guide
BRP Defender Traxter HD10 · owner's guide · 324 pages
Technical data
Numbers below were extracted automatically from the document. Verify them against the original manual before you order parts or apply torque.
Tightening torque
Values extracted from the document text. Check against the original before service work.
| Item | Value | Also | PDF page |
|---|---|---|---|
| Pre-filter retaining | 2.5 ± 0.5 N·m | p. 197 | |
| Resonator screw | 2.5 ± 0.45 N·m | 22 in·lb | p. 198 |
| Secondary drain plug | 15 ± 2.03 N·m | 133 in·lb | p. 202 |
| Magnetic drain plug | 30 ± 3 N·m | p. 202 | |
| Secondary drain plug | 29.8 ± 2.71 N·m | 22 ft·lb | p. 202 |
| Oil filter cover screws | 9 ± 1.02 N·m | 80 in·lb | p. 206 |
| Evacuation screw | 6 ± 0.68 N·m | 53 in·lb | p. 206 |
| Tail pipe screws NOTICE | 31.2 ± 4.07 N·m | 23 ft·lb | p. 219 |
| Gearbox magnetic drain | 30 ± 3 N·m | p. 221 | |
| Filler plug | 16.5 ± 2.5 N·m | p. 222 | |
| Drain plug | 2.5 ± 0.5 N·m | p. 223 | |
| Drain plug | 2.7 ± 0.45 N·m | 24 in·lb | p. 223 |
| Thrust rollers bearing | 16.5 ± 2.5 N·m | p. 224 | |
| CVT cover screws | 7 ± 0.79 N·m | 62 in·lb | p. 226 |
| Spark Plug Gap | 9 ± 1 N·m | p. 232 | |
| Spark plug | 11 ± 1.02 N·m | 97 in·lb | p. 232 |
| Battery terminal screws | 5 ± 0.45 N·m | 44 in·lb | p. 235 |
| Wheel lug nuts pressure | 120 ± 10 N·m | p. 246 | |
| Rear suspension arm | 112.5 ± 7.5 N·m | p. 248 | |
| Shock absorber nuts | 112.5 ± 7.46 N·m | 83 ft·lb | p. 248 |
| Filler cap screws | 0.7 ± 0.09 N·m | 6.2 in·lb | p. 250 |
Spark plugs
Values extracted from the document text. Check against the original before service work.
| Item | Value | Also | PDF page |
|---|---|---|---|
| HD10 | — | p. 286 |
Get the document
The full file is delivered by the bot. Free owner guides for BRP are also available from the manufacturer.
Open in Telegram — the bot finds this document by its catalog id and sends the file.
Open in bot- Official free BRP owner's manualsParts catalogueAll manuals