BRP OUTBOARD Manual

BRP OUTBOARD · manual · 342 pages

Technical data

Numbers below were extracted automatically from the document. Verify them against the original manual before you order parts or apply torque.

Tightening torque

Values extracted from the document text. Check against the original before service work.

ItemValueAlsoPDF page
Mark spark plugs for ground electrode orienta20.3 N·m20 N·mp. 38
Throttle shaft surface9.5 N·m84 in·lbp. 84
Gasket Sealing Compound5.5 N·m49 in·lbp. 85
F Blue Nut Lock5.5 N·mp. 85
Center screws first and expand out12 N·mp. 142
Crankcase flange screws12 N·mp. 185
F Blue Nut Lock16.3 N·m12 ft·lbp. 203
Trim switch wiring38 N·mp. 236
Cotter pin12 N·mp. 239
Place tiller bracket on steering arm27 N·mp. 241
Needle Bearing Grease16.3 N·m144 in·lbp. 246
Taper of bushing matching taper of shaft16.5 N·mp. 248
Water tube enters grommet on water pump9.5 N·mp. 251
Manual release valve a minimum of three turns6 N·mp. 271
Hydraulic pump68 N·mp. 272

Spark plugs

Values extracted from the document text. Check against the original before service work.

ItemValueAlsoPDF page
QC10WEP—p. 13

Get the document

The full file is delivered by the bot. Free owner guides for BRP are also available from the manufacturer.

Open in Telegram — the bot finds this document by its catalog id and sends the file.

Open in bot