Polaris DRAGON RMK HO 2007 Service manual
Polaris DRAGON RMK HO · 2007 · service manual · 327 pages
Technical data
Numbers below were extracted automatically from the document. Verify them against the original manual before you order parts or apply torque.
Tightening torque
Values extracted from the document text. Check against the original before service work.
| Item | Value | Also | PDF page |
|---|---|---|---|
| Weight Spring Spring Helix | 67.8 N·m | 69 N·m | p. 6 |
| Air screw setting 1.0 Drive clutch bolt | 67.8 N·m | 69 N·m | p. 14 |
| Drive clutch bolt | 108.5 N·m | 108 N·m | p. 36 |
| Retaining bolt | 24.4 N·m | 24.4 N·m | p. 70 |
| Bellows Washer | 16.3 N·m | 12 ft·lb | p. 106 |
| Cover/base fasteners | 16.3 N·m | 16 N·m | p. 107 |
| Knock Sensor | 12.2 N·m | 9 ft·lb | p. 111 |
| Thermostat cover screws only require | 5.4 N·m | 48 in·lb | p. 111 |
| Thermostat cover screws only require | 5 N·m | p. 111 | |
| Cylinders | 16 N·m | p. 111 | |
| Placement of each engine strap | 12.2 N·m | 12 N·m | p. 127 |
| Crankcase (20). TRIGGER COIL BOLTS | 5.4 N·m | 5 N·m | p. 127 |
| Head Pattern | 29.8 N·m | 30 N·m | p. 127 |
| 3 flywheel nut | 122 N·m | 122 N·m | p. 129 |
| Motor mount stud | 38 N·m | 38 N·m | p. 130 |
| Engine Assembly | 29.8 N·m | 22 ft·lb | p. 138 |
| Engine Assembly | 29 N·m | p. 138 | |
| Crankcase (29). Head Bolt | 29.8 N·m | 29 N·m | p. 138 |
| Head Pattern | 33.9 N·m | 34 N·m | p. 139 |
| Cylinder Base Pattern | 43.4 N·m | 43 N·m | p. 139 |
| Case Pattern | 29.8 N·m | 30 N·m | p. 139 |
| PTO coil | 38 N·m | 37.9 N·m | p. 142 |
| Weight pin | 3.4 N·m | 3 N·m | p. 164 |
| Drive Clutch Bolt | 62 N·m | p. 166 | |
| Cover bolts | 10.8 N·m | 11 N·m | p. 177 |
| Jackshaft nut | 67.8 N·m | 62.5 N·m | p. 177 |
| F Washer S Drain plug | 10.8 N·m | 11 N·m | p. 177 |
| Upper c-clip Y | 25.8 N·m | 26 N·m | p. 177 |
| Speedo drive cover nuts | 5 N·m | p. 179 | |
| Top Sprocket Nut | 8 N·m | p. 179 | |
| C Seal P Flangette Nuts | 14.9 N·m | 15 N·m | p. 180 |
| Carriage Bolts | 14.9 N·m | 15 N·m | p. 180 |
| Bulkhead area T Speed Sensor Bolt | 6.8 N·m | 7 N·m | p. 180 |
| Driven clutch retaining | 23 N·m | 23 N·m | p. 180 |
| Z Nylock Nut | 27.1 N·m | 27 N·m | p. 180 |
| Retaining bolt | 23 N·m | 23 N·m | p. 181 |
| Tie Rod Lock Nuts | 14.9 N·m | 15 N·m | p. 197 |
| Upper and Lower Spindle | 54.2 N·m | 54 N·m | p. 197 |
| Trailing Arm fastener | 81.3 N·m | 60 ft·lb | p. 199 |
| Drag link fasteners, Steering arm | 39.3 N·m | 39 N·m | p. 200 |
| Drag link fasteners, Steering arm | 51.5 N·m | 52 N·m | p. 200 |
| Trailing arm fastener | 58.3 N·m | 58 N·m | p. 200 |
| Center Steering Arm | 78.6 N·m | 79 N·m | p. 200 |
| IFS Shock Fastener | 39.3 N·m | 39 N·m | p. 205 |
| Flanged nut | 54.2 N·m | 54 N·m | p. 207 |
| Camber lock nut | 61 N·m | 61 N·m | p. 208 |
| Jam nut | 61 N·m | 61 N·m | p. 208 |
| Steering arm nut | 39.3 N·m | 39 N·m | p. 208 |
| Spindle Assembly | 39.3 N·m | 39 N·m | p. 208 |
| Spindle Assembly | 54.2 N·m | 54 N·m | p. 208 |
| Hex bolts | 47.5 N·m | 47 N·m | p. 230 |
| Spring Ratio 130/ | 40.7 N·m | 41 N·m | p. 240 |
| Lock Ring | 13.6 N·m | 14 N·m | p. 240 |
| Shock Rod Bearing Cap | 40.7 N·m | 41 N·m | p. 242 |
| Banjo Bolt Fitting | 20.3 N·m | 20 N·m | p. 242 |
Spark plugs
Values extracted from the document text. Check against the original before service work.
| Item | Value | Also | PDF page |
|---|---|---|---|
| BR8ES | — | p. 7 | |
| RN3C | — | p. 11 | |
| RN57YCC | — | p. 13 | |
| BR9ES | — | p. 15 | |
| T40 | — | p. 143 | |
| PF6H | — | p. 145 | |
| EC34 | — | p. 263 |
Service intervals
Values extracted from the document text. Check against the original before service work.
| Item | Value | Also | PDF page |
|---|---|---|---|
| Coolant change | 2 years | p. 61 |
Get the document
The full file is delivered by the bot. Free owner guides for Polaris are also available from the manufacturer.
Open in Telegram — the bot finds this document by its catalog id and sends the file.
Open in bot- Official free Polaris owner's manualsParts catalogueAll manuals