Sea-Doo Yd All Models 2006 Service manual

Sea-Doo Yd All Models · 2006 · service manual · 663 pages

Technical data

Numbers below were extracted automatically from the document. Verify them against the original manual before you order parts or apply torque.

Tightening torque

Values extracted from the document text. Check against the original before service work.

ItemValueAlsoPDF page
Engine support screws25 N·mp. 51
Naturally Aspirated Engine10 N·mp. 60
Supercharged Engine10 N·mp. 61
Onal nut threads30 N·mp. 82
Clamps8 N·mp. 95
Torquing screws again10 N·mp. 95
PTO coupling250 N·mp. 104
Stator and CPS screws10 N·mp. 105
Rotor screws15 N·mp. 106
Rotor screws24 N·mp. 106
Oil filter screw9 N·mp. 114
Suction pump cover screws10 N·mp. 117
Oil pump cover screws10 N·mp. 122
Suction pump housing screws10 N·mp. 124
Screws at first10 N·mp. 146
Engine (191 Ibfeft)260 N·mp. 159
Engine ae45 N·mp. 159
Chain tensioner plug screw18 N·mp. 160
Screw threads40 N·mp. 177
Screw threads55 N·mp. 177
Clamps4 N·mp. 224
Jet pump SN. l- gt125 N·mp. 267
Jet pump SN. l- gt (53 Ibfein)6 N·mp. 267
Jet pump ts Ie Me (16 Ibfeft)21 N·mp. 267
Jet pump Se7.5 N·mp. 268
Threads of venturi bolts21 N·mp. 271
Clamp screw1.7 N·mp. 273
Housing7 N·mp. 304
Handlebar grip screw7 N·mp. 308
Bolts of steering stem arm6 N·mp. 313
Jam nut2.5 N·mp. 315
Retaining block screws on cable support6 N·mp. 315
Wards valve1.7 N·mp. 321
Pull out engine cover18 N·mp. 349
Sponson nuts16 N·mp. 365

Spark plugs

Values extracted from the document text. Check against the original before service work.

ItemValueAlsoPDF page
B28—p. 52
Spark plug0.5 mmp. 94
Spark plug0.7–0.8 mmp. 372

Service intervals

Values extracted from the document text. Check against the original before service work.

ItemValueAlsoPDF page
Coolant change200 hoursp. 24
Coolant change100 hoursp. 131

Get the document

The full file is delivered by the bot. Free owner guides for Sea-Doo are also available from the manufacturer.

Open in Telegram — the bot finds this document by its catalog id and sends the file.

Open in bot