Ski-Doo Engine ETEC DS Gen5 2024

Ski-Doo · 2024 · service manual · 56 pages

Technical data

Numbers below were extracted automatically from the document. Verify them against the original manual before you order parts or apply torque.

Values extracted from the document text. Check against the original before service work.

Item	Value	Also	PDF page
Engine support screw	31.2 ± 4.07 N·m	23 ft·lb	p. 16
Engine rubber mount	24.5 ± 3.5 N·m		p. 16
Ground cable screw	10.1 ± 2.03 N·m	89 in·lb	p. 16
Engine rubber mount	10 ± 2 N·m		p. 17
Air filter screws	1.2 ± 0.23 N·m	11 in·lb	p. 27
Secondary air intake	1.25 ± 0.25 N·m		p. 29
Silencer screws	1.2 ± 0.23 N·m	11 in·lb	p. 29
Muffler retaining screw	7 ± 1.02 N·m	62 in·lb	p. 36
Sensor's temperature	4.5 ± 1.5 N·m		p. 42
Sensor's temperature	28 ± 1 N·m		p. 42
Exhaust Gas	45 ± 2 N·m		p. 42
Temperature Sensor	44.7 ± 2.03 N·m	33 ft·lb	p. 42
EPS retaining screw	1.7 ± 0.23 N·m	15 in·lb	p. 44
Coolant hose clamp	3.1 ± 0.45 N·m	27 in·lb	p. 51
K40 x 16 Torx screw	1.5 ± 0.45 N·m	13 in·lb	p. 54

The full file is delivered by the bot. Free owner guides for Ski-Doo are also available from the manufacturer.

Open in Telegram — the bot finds this document by its catalog id and sends the file.

Open in bot