Ski-Doo GEN4 E TEC 2022 Owner's guide
Ski-Doo GEN4 E TEC · 2022 · owner's guide · 306 pages
Technical data
Numbers below were extracted automatically from the document. Verify them against the original manual before you order parts or apply torque.
Tightening torque
Values extracted from the document text. Check against the original before service work.
| Item | Value | Also | PDF page |
|---|---|---|---|
| Intake duct clamp | 1 ± 0.2 N·m | 9 in·lb | p. 117 |
| Upper body screws | 1.8 ± 0.2 N·m | 16 in·lb | p. 117 |
| Gauge support screws | 2.3 ± 0.2 N·m | 20 in·lb | p. 118 |
| Gearbox drain plug | 6 ± 1 N·m | 53 in·lb | p. 186 |
| Filler plug | 8 ± 1 N·m | 71 in·lb | p. 190 |
| Oil level check plug | 6 ± 1 N·m | 53 in·lb | p. 192 |
| Clamping bolt | 5.5 ± 0.5 N·m | 49 in·lb | p. 197 |
| Rear idler wheel retaining | 48 ± 6 N·m | 35 ft·lb | p. 203 |
| Rear idler wheel screws | 24.5 ± 3.5 N·m | 18 ft·lb | p. 206 |
| Rear idler wheel screws | 48 ± 6 N·m | 35 ft·lb | p. 206 |
| Stopper strap nut | 10 ± 1 N·m | 89 in·lb | p. 206 |
| Battery terminals | 10 ± 2 N·m | 89 in·lb | p. 219 |
| Battery hold down bracket | 5 ± 0.5 N·m | 44 in·lb | p. 219 |
| Battery cover retaining screws | 1.5 ± 0.5 N·m | 13 in·lb | p. 219 |
| Battery cover retaining screws | 5 ± 0.5 N·m | 44 in·lb | p. 222 |
| Spark plug | 28 ± 2 N·m | 21 ft·lb | p. 227 |
Capacities
Values extracted from the document text. Check against the original before service work.
| Item | Value | Also | PDF page |
|---|---|---|---|
| Fuel tank | 42 L | p. 247 |
Service intervals
Values extracted from the document text. Check against the original before service work.
| Item | Value | Also | PDF page |
|---|---|---|---|
| Drive chain service | 3 years | p. 178 |
Get the document
The full file is delivered by the bot. Free owner guides for Ski-Doo are also available from the manufacturer.
Open in Telegram — the bot finds this document by its catalog id and sends the file.
Open in bot- Official free Ski-Doo owner's manualsParts catalogueAll manuals