Ski-Doo GEN4 E TEC 2022 Owner's guide

Ski-Doo GEN4 E TEC · 2022 · owner's guide · 372 pages

Technical data

Numbers below were extracted automatically from the document. Verify them against the original manual before you order parts or apply torque.

Values extracted from the document text. Check against the original before service work.

Item	Value	Also	PDF page
Intake duct clamp	1 ± 0.2 N·m	9 in·lb	p. 131
Upper body screws	1.8 ± 0.2 N·m	16 in·lb	p. 131
Gauge support screws	2.3 ± 0.2 N·m	20 in·lb	p. 132
Handhold screw	24.5 ± 3.5 N·m	18 ft·lb	p. 138
Ski nut	48 ± 6 N·m	35 ft·lb	p. 223
Gearbox drain plug	6 ± 1 N·m	53 in·lb	p. 240
Filler plug	8 ± 1 N·m	71 in·lb	p. 244
Oil level check plug	6 ± 1 N·m	53 in·lb	p. 246
Clamping bolt	5.5 ± 0.5 N·m	49 in·lb	p. 251
Rear idler wheel retaining	48 ± 6 N·m	35 ft·lb	p. 262
Rear idler wheel screws	24.5 ± 3.5 N·m	18 ft·lb	p. 265
Rear idler wheel screws	48 ± 6 N·m	35 ft·lb	p. 265
Stopper strap nut	10 ± 1 N·m	89 in·lb	p. 265
Battery terminals	10 ± 2 N·m	89 in·lb	p. 277
Battery hold down bracket	5 ± 0.5 N·m	44 in·lb	p. 277
Battery cover retaining screws	1.5 ± 0.5 N·m	13 in·lb	p. 277
Battery cover retaining screws	5 ± 0.5 N·m	44 in·lb	p. 280
Spark plug	28 ± 2 N·m	21 ft·lb	p. 285

Values extracted from the document text. Check against the original before service work.

Item	Value	Also	PDF page
Drive chain service	3 years		p. 232

The full file is delivered by the bot. Free owner guides for Ski-Doo are also available from the manufacturer.

Open in Telegram — the bot finds this document by its catalog id and sends the file.

Open in bot