Ski-Doo Tundra II LT 1997 Shop manual
Ski-Doo Tundra II LT · 1997 · shop manual · 926 pages
Technical data
Numbers below were extracted automatically from the document. Verify them against the original manual before you order parts or apply torque.
Tightening torque
Values extracted from the document text. Check against the original before service work.
| Item | Value | Also | PDF page |
|---|---|---|---|
| Case, nut | 4 N·m | 35 in·lb | p. 9 |
| Engine mount screws | 21 N·m | 15 ft·lb | p. 57 |
| Intake socket bolts | 22 N·m | 16 ft·lb | p. 74 |
| Case halves | 22 N·m | 16 ft·lb | p. 77 |
| Fore nut | 105 N·m | 77 ft·lb | p. 94 |
| Under head | 15 N·m | 133 in·lb | p. 135 |
| Ment, engine support bolts | 55 N·m | 41 ft·lb | p. 154 |
| Caliper and Nut | 24.4 N·m | 18 ft·lb | p. 160 |
| Strap end | 11 N·m | 97 in·lb | p. 230 |
| Lock nut | 20 N·m | 15 ft·lb | p. 257 |
| Cylinder Head Nuts | 26 N·m | 19 ft·lb | p. 278 |
| Axial Fan Shaft Nut N.A | 50 N·m | 37 ft·lb | p. 278 |
| Engine support screws | 48 N·m | 35 ft·lb | p. 365 |
| Manifold screws | 23 N·m | 17 ft·lb | p. 365 |
| 494 engine only | 28.5 N·m | 21 ft·lb | p. 367 |
| Pipe sealant Loctite Grease | 29 N·m | p. 367 | |
| Pipe sealant Loctite Grease | 10 N·m | p. 367 | |
| Cylinder head cover screws | 10 N·m | 90 in·lb | p. 371 |
| Fuel Level Sensor Screws | 0.9 N·m | 8 in·lb | p. 432 |
| Nut and Governor Cup locking nuts | 10 N·m | 89 in·lb | p. 446 |
| NICAL DATA 09-03. nut | 11 N·m | p. 545 | |
| Retaining screw | 48 N·m | p. 570 | |
| Crankcase/Engine Support Nuts or Screws | 38 N·m | 28 ft·lb | p. 602 |
| ENGINE COLD Crankcase Nuts or Screws | 40 N·m | 29 ft·lb | p. 602 |
| Cylinder Head Nuts | 22 N·m | 16 ft·lb | p. 602 |
| Crankcase/Cylinder Nuts or Screws N.A | 29 N·m | 21 ft·lb | p. 602 |
| Axial Fan Shaft Nut | 50 N·m | 37 ft·lb | p. 602 |
| Crankcase/Engine Support Nuts or Screws | 40 N·m | 29 ft·lb | p. 603 |
| Cylinder Head Nuts | 29 N·m | 21 ft·lb | p. 603 |
| Crankcase/Cylinder Nuts or Screws | 29 N·m | 21 ft·lb | p. 603 |
| ENGINE COLD Crankcase Nuts or Screws | 39 N·m | 29 ft·lb | p. 605 |
| Axial Fan Shaft Nut N.A | 48 N·m | 35 ft·lb | p. 605 |
| Engine/support nuts | 35 N·m | 26 ft·lb | p. 699 |
| Rubber mount/support bracket | 29 N·m | p. 699 | |
| Manifold Screw | 28.5 N·m | 21 ft·lb | p. 699 |
| Rubber mount/support nuts | 37 N·m | 27 ft·lb | p. 699 |
| Manifold screws | 10 N·m | 89 in·lb | p. 699 |
| Assembly, cylinder head screws | 12 N·m | p. 705 | |
| Assembly, cylinder head screws | 30 N·m | 22 ft·lb | p. 705 |
| Water pump housing screws | 10 N·m | p. 708 | |
| Fuel Level Sensor Screws | 2.5 N·m | 22 in·lb | p. 751 |
| Crankcase/Engine Support Nuts or Screws | 13 N·m | 9.6 ft·lb | p. 851 |
| ENGINE COLD Crankcase Nuts or Screws | 13 N·m | 9.6 ft·lb | p. 851 |
| Axial Fan Shaft Nut N.A | 29 N·m | 21 ft·lb | p. 922 |
Spark plugs
Values extracted from the document text. Check against the original before service work.
| Item | Value | Also | PDF page |
|---|---|---|---|
| Spark plug | 1 mm | p. 77 | |
| BR9ES | — | p. 191 | |
| BR8ES | — | p. 493 | |
| BR10ES | — | p. 794 |
Get the document
The full file is delivered by the bot. Free owner guides for Ski-Doo are also available from the manufacturer.
Open in Telegram — the bot finds this document by its catalog id and sends the file.
Open in bot- Official free Ski-Doo owner's manualsParts catalogueAll manuals