Can-Am-am 2008 Shop

BRP Can-Am-am · 2008 · shop manual · 401 pages

Technical data

Numbers below were extracted automatically from the document. Verify them against the original manual before you order parts or apply torque.

Values extracted from the document text. Check against the original before service work.

Item	Value	Also	PDF page
Starter screws	9 N·m	89 in·lb	p. 102
Threads of camshaft timing gear screws	40 N·m	30 ft·lb	p. 116
Threads of camshaft timing gear screws	11 N·m	97 in·lb	p. 116
Switch retaining nut	4 N·m		p. 249
Coil mounting screws	5 N·m		p. 256
Rear axle lock bolts	48 N·m		p. 293
Axle nut	31 N·m	23 ft·lb	p. 299
Wheel hub nut	250 N·m	184 ft·lb	p. 308
Pin	5 N·m	44 in·lb	p. 357
Caliper screws	25 N·m	18 ft·lb	p. 358
Brake pad pins	22 N·m	16 ft·lb	p. 358
Brake disc screws	25 N·m	18 ft·lb	p. 358
Brake light switch	25 N·m	18 ft·lb	p. 360
Washers	25 N·m	18 ft·lb	p. 362

Values extracted from the document text. Check against the original before service work.

Item	Value	Also	PDF page
Fuel tank	11.5 L		p. 393

Values extracted from the document text. Check against the original before service work.

Item	Value	Also	PDF page
PF1	—		p. 246
P12	—		p. 392

Values extracted from the document text. Check against the original before service work.

Item	Value	Also	PDF page
Coolant change	50 hours		p. 23

The full file is delivered by the bot. Free owner guides for BRP are also available from the manufacturer.

Open in Telegram — the bot finds this document by its catalog id and sends the file.

Open in bot