Can-Am-am 2011 Shop
BRP Can-Am-am · 2011 · shop manual · 423 pages
Technical data
Numbers below were extracted automatically from the document. Verify them against the original manual before you order parts or apply torque.
Tightening torque
Values extracted from the document text. Check against the original before service work.
| Item | Value | Also | PDF page |
|---|---|---|---|
| Tail pipe retaining screws | 11 ± 1.02 N·m | 97 in·lb | p. 34 |
| Oil filler screw | 0.6 N·m | 5 in·lb | p. 45 |
| WHEEL LUG NUTS Tie-Rod End | 100.3 ± 9.49 N·m | 74 ft·lb | p. 48 |
| Gear clamps | 0.5 N·m | p. 67 | |
| Gear clamps | 1 N·m | p. 67 | |
| Air filter housing nuts | 6 ± 1.02 N·m | 53 in·lb | p. 67 |
| Head pipe nuts | 13 ± 1.02 N·m | 115 in·lb | p. 71 |
| Ified one cylinder at a time | 2.5 ± 2 N·m | p. 122 | |
| Valve cover retaining screws | 7 N·m | 62 in·lb | p. 122 |
| Drive pulley screw | 120 ± 8 N·m | 89 ft·lb | p. 189 |
| Actuator screws | 24.4 ± 2.71 N·m | 18 ft·lb | p. 204 |
| Shift lever handle nut | 15.5 ± 1.5 N·m | 137 in·lb | p. 224 |
| Pull throttle body off plenum | 1.2 ± 11 N·m | p. 262 | |
| Ignition Switch Wire Identification | 8 N·m | 71 in·lb | p. 293 |
| Starter mounting screw I 25 Nom | 24.4 N·m | 18 ft·lb | p. 303 |
| Differential housing | 33 N·m | p. 325 | |
| Differential retaining | 70 ± 5 N·m | p. 326 | |
| Differential upper bolts | 24.5 ± 3.5 N·m | p. 326 | |
| Differential support nut | 24.4 ± 4.07 N·m | 18 ft·lb | p. 326 |
| Differential support bolt | 24.4 N·m | 18 ft·lb | p. 326 |
| Wheel hub nut | 225.1 ± 14.91 N·m | 166 ft·lb | p. 331 |
| Propeller shaft screw | 75 ± 5 N·m | p. 333 | |
| Engine side | 75 ± 5 N·m | p. 333 | |
| Final drive retaining nuts | 70.5 ± 5.42 N·m | 52 ft·lb | p. 337 |
| Final drive housing | 32.5 N·m | p. 337 | |
| Pinion nut | 180.3 ± 14.91 N·m | 133 ft·lb | p. 337 |
| Steering column U-joints | 31 N·m | 23 ft·lb | p. 347 |
| Suspension | 48 ± 6 N·m | p. 352 | |
| Rear shock absorber | 48 ± 6 N·m | 35 ft·lb | p. 354 |
| Seals | 109.8 N·m | 81 ft·lb | p. 363 |
| Caliper retaining screws | 47.5 N·m | 35 ft·lb | p. 370 |
Capacities
Values extracted from the document text. Check against the original before service work.
| Item | Value | Also | PDF page |
|---|---|---|---|
| Fuel tank | 37.8 L | p. 407 |
Spark plugs
Values extracted from the document text. Check against the original before service work.
| Item | Value | Also | PDF page |
|---|---|---|---|
| IX1 | — | p. 28 | |
| M10 | — | p. 125 | |
| PF1 | — | p. 413 |
Service intervals
Values extracted from the document text. Check against the original before service work.
| Item | Value | Also | PDF page |
|---|---|---|---|
| Coolant change | 2 years | p. 41 |
Get the document
The full file is delivered by the bot. Free owner guides for BRP are also available from the manufacturer.
Open in Telegram — the bot finds this document by its catalog id and sends the file.
Open in bot- Official free BRP owner's manualsParts catalogueAll manuals