BRP Snow 600R E 2024 Manual
BRP Snow 600R E · 2024 · manual · 184 pages
Technical data
Numbers below were extracted automatically from the document. Verify them against the original manual before you order parts or apply torque.
Tightening torque
Values extracted from the document text. Check against the original before service work.
| Item | Value | Also | PDF page |
|---|---|---|---|
| Bearing screw | 8 ± 0.45 N·m | 71 in·lb | p. 24 |
| Rewind starter screws | 9 ± 0.56 N·m | 80 in·lb | p. 25 |
| Sensor Pin | 5 ± 1 N·m | p. 36 | |
| Transmission | 5 ± 0.3 N·m | p. 41 | |
| Coolant hose clamp | 5.5 ± 0.5 N·m | p. 46 | |
| Water pump cover | 11 ± 0.8 N·m | p. 46 | |
| Taptite screws | 6 ± 0.68 N·m | 53 in·lb | p. 50 |
| Bearing carrier screws | 5 ± 0.34 N·m | 44 in·lb | p. 50 |
| Magneto and Starter | 11 ± 0.79 N·m | 97 in·lb | p. 54 |
| Magneto and Starter | 9 ± 0.6 N·m | p. 57 | |
| CPS screws | 9 ± 0.56 N·m | 80 in·lb | p. 57 |
| Magneto flywheel | 125 ± 9 N·m | p. 60 | |
| Magneto housing | 9 ± 0.6 N·m | p. 61 | |
| Stator screws Stator screws | 10.1 ± 0.68 N·m | 89 in·lb | p. 63 |
| RAVE Valve | 8 ± 0.5 N·m | p. 76 | |
| RAVE Valve | 4 ± 0.3 N·m | p. 77 | |
| RAVE valve housing | 10 ± 0.7 N·m | p. 81 | |
| Collar nuts | 4 ± 0.34 N·m | 35 in·lb | p. 82 |
| RAVE cable lock nut | 20.3 ± 1.36 N·m | 15 ft·lb | p. 83 |
| Rave cable lock nut | 5 ± 0.56 N·m | 44 in·lb | p. 83 |
| Bracket | 20 ± 2 N·m | p. 83 | |
| Bracket screws | 11 ± 0.79 N·m | 97 in·lb | p. 85 |
| Servomotor screws | 4 ± 1.02 N·m | 35 in·lb | p. 85 |
| Reed valve blade | 1.5 ± 0.3 N·m | p. 90 | |
| Intake adapter screws | 6 ± 0.4 N·m | p. 90 | |
| Cylinder Head Warpage Cylinder head | 7 ± 0.2 N·m | p. 92 | |
| Cylinder block screws | 50.2 ± 1.36 N·m | 37 ft·lb | p. 96 |
| M6 Crankcase screws | 11 ± 0.79 N·m | 97 in·lb | p. 107 |
| M8 Crankcase screws | 29.8 ± 1.36 N·m | 22 ft·lb | p. 107 |
| Oil seal cover screws | 11 ± 0.79 N·m | 97 in·lb | p. 108 |
| Fuel hose retainer | 5 N·m | p. 142 | |
| Fuel rail screws | 8 ± 0.45 N·m | 71 in·lb | p. 146 |
| Throttle body clamps | 1.5 ± 0.2 N·m | p. 148 | |
| Adapter plate clamps | 0.7 ± 0.11 N·m | 6 in·lb | p. 148 |
| TPS Resistance Test TPS screw | 4 ± 0.45 N·m | 35 in·lb | p. 151 |
| Spark plug | 23 ± 1.36 N·m | 17 ft·lb | p. 163 |
| Left hand side panel | 2.4 ± 0.2 N·m | p. 166 | |
| Engine Harness | 8 ± 0.5 N·m | p. 174 | |
| Ground cable screw | 8 ± 0.45 N·m | 71 in·lb | p. 174 |
Get the document
The full file is delivered by the bot. Free owner guides for BRP are also available from the manufacturer.
Open in Telegram — the bot finds this document by its catalog id and sends the file.
Open in bot- Official free BRP owner's manualsParts catalogueAll manuals