BRP Snow Turbo E 2024 Manual
BRP Snow Turbo E · 2024 · manual · 226 pages
Technical data
Numbers below were extracted automatically from the document. Verify them against the original manual before you order parts or apply torque.
Tightening torque
Values extracted from the document text. Check against the original before service work.
| Item | Value | Also | PDF page |
|---|---|---|---|
| Exhaust manifold | 34 ± 4 N·m | p. 18 | |
| Procedures screws | 33.9 ± 4.07 N·m | 25 ft·lb | p. 18 |
| Bearing screw | 8 ± 0.45 N·m | 71 in·lb | p. 26 |
| Rewind starter screws | 9 ± 0.56 N·m | 80 in·lb | p. 27 |
| Sensor Pin | 5 ± 1 N·m | p. 39 | |
| Coolant hose clamp | 5.5 ± 0.5 N·m | p. 49 | |
| Water pump cover | 11 ± 0.8 N·m | p. 49 | |
| Bearing carrier screws | 5 ± 0.34 N·m | 44 in·lb | p. 53 |
| Magneto and Starter | 11 ± 0.79 N·m | 97 in·lb | p. 57 |
| Magneto and Starter | 9 ± 0.6 N·m | p. 60 | |
| CPS screws | 9 ± 0.56 N·m | 80 in·lb | p. 60 |
| Magneto flywheel | 125 ± 9 N·m | p. 63 | |
| Magneto housing | 9 ± 0.6 N·m | p. 64 | |
| Stator screws Stator screws | 10.1 ± 0.68 N·m | 89 in·lb | p. 66 |
| RAVE valve housing | 10 ± 0.7 N·m | p. 86 | |
| Collar nuts | 4 ± 0.34 N·m | 35 in·lb | p. 86 |
| Hold counter nut | 20 ± 2 N·m | p. 87 | |
| RAVE cable lock nut | 20.3 ± 1.36 N·m | 15 ft·lb | p. 87 |
| Retaining plate screw | 5 ± 0.56 N·m | 44 in·lb | p. 88 |
| Bracket screws | 11 ± 0.79 N·m | 97 in·lb | p. 90 |
| Servomotor screws | 4 ± 1.02 N·m | 35 in·lb | p. 90 |
| RAVE nut wrench | 4 ± 0.3 N·m | p. 97 | |
| Bracket | 20 ± 2 N·m | p. 104 | |
| Reed valve blade | 1.5 ± 0.3 N·m | p. 110 | |
| Retaining screws | 6 ± 0.45 N·m | 53 in·lb | p. 111 |
| Cylinder head | 7 ± 0.2 N·m | p. 113 | |
| Cylinder block screws | 50.2 ± 1.36 N·m | 37 ft·lb | p. 117 |
| Crankshaft for procedure | 30 ± 2 N·m | p. 129 | |
| M6 Crankcase screws | 11 ± 0.79 N·m | 97 in·lb | p. 129 |
| Oil seal cover screws | 11 ± 0.79 N·m | 97 in·lb | p. 130 |
| MAG side RAVE valve | 6 ± 0.7 N·m | p. 142 | |
| Oil catch tank screw | 7.5 ± 1.02 N·m | 66 in·lb | p. 149 |
| Oil pump screw | 1.8 ± 0.23 N·m | 16 in·lb | p. 150 |
| Opened 0.4 V - 0.7 V screw | 24.4 ± 4.07 N·m | 18 ft·lb | p. 153 |
| Retaining screws | 11 ± 0.79 N·m | 97 in·lb | p. 156 |
| Fuel hose retainer | 5 N·m | p. 183 | |
| Otherwise, throttle body may have | 8 ± 0.5 N·m | p. 188 | |
| Fuel rail screws replaced | 8 ± 0.45 N·m | 71 in·lb | p. 188 |
| Throttle body clamps | 1.5 ± 0.23 N·m | 13 in·lb | p. 190 |
| Adapter plate clamps | 0.7 ± 0.11 N·m | 6 in·lb | p. 190 |
| TPS screw | 4 ± 0.45 N·m | 35 in·lb | p. 193 |
| Intake adapter screws | 6 ± 0.45 N·m | 53 in·lb | p. 195 |
| Spark plug | 23 ± 1.36 N·m | 17 ft·lb | p. 205 |
| Left hand side panel | 2.4 ± 0.2 N·m | p. 208 | |
| Ground cable screw | 8 ± 0.45 N·m | 71 in·lb | p. 217 |
| Knock sensor screw | 24.4 ± 1.36 N·m | 18 ft·lb | p. 219 |
Get the document
The full file is delivered by the bot. Free owner guides for BRP are also available from the manufacturer.
Open in Telegram — the bot finds this document by its catalog id and sends the file.
Open in bot- Official free BRP owner's manualsParts catalogueAll manuals