Ski-Doo Drive System Brake Service manual

Ski-Doo Drive System Brake · service manual · 74 pages

Technical data

Numbers below were extracted automatically from the document. Verify them against the original manual before you order parts or apply torque.

Values extracted from the document text. Check against the original before service work.

Item	Value	Also	PDF page
Sensor screw	1.8 ± 0.23 N·m	16 in·lb	p. 12
Drive System and Brake	8 ± 1 N·m		p. 18
Retaining screws	20.3 ± 1.36 N·m	15 ft·lb	p. 20
Roller axle screw	5 ± 0.45 N·m	44 in·lb	p. 30
Damper screws	31.2 ± 4.07 N·m	23 ft·lb	p. 31
Drive System and Brake	120 ± 5 N·m		p. 32
Pivot screws	16.9 ± 1.02 N·m	150 in·lb	p. 39
Cam screw	31.2 ± 4.07 N·m	23 ft·lb	p. 40
Bearing flange nut	15.5 ± 1.47 N·m	137 in·lb	p. 41
Drive System and Brake	27 ± 1 N·m		p. 44
Protective cover screw	10.1 ± 2.03 N·m	89 in·lb	p. 46
Brake lever pivot nut	6 ± 1 N·m		p. 48
Brake caliper bleeder spilled	8 ± 1.02 N·m	71 in·lb	p. 48
Brake pad pin on caliper	10.1 ± 2.03 N·m	89 in·lb	p. 50
Caliper screws	24.4 ± 4.07 N·m	18 ft·lb	p. 52
Master cylinder clamp	9 ± 1 N·m		p. 53
Clamp screw	10.1 ± 2.03 N·m	89 in·lb	p. 55
Clamp screw	35 ± 1 N·m		p. 55
Caliper Banjo fitting	35.3 ± 1.36 N·m	26 ft·lb	p. 55
Master cylinder Banjo	27 ± 1 N·m		p. 55
Caliper Banjo fitting	27.1 ± 1.36 N·m	20 ft·lb	p. 55
Drain plug	6 ± 1 N·m	53 in·lb	p. 58
Rear axle screw	48 ± 6 N·m	35 ft·lb	p. 73

The full file is delivered by the bot. Free owner guides for Ski-Doo are also available from the manufacturer.

Open in Telegram — the bot finds this document by its catalog id and sends the file.

Open in bot