Ski-Doo Doc1m Fgdqbuqgtxyjl Manual
Ski-Doo Doc1m Fgdqbuqgtxyjl · manual · 1122 pages
Technical data
Numbers below were extracted automatically from the document. Verify them against the original manual before you order parts or apply torque.
Tightening torque
Values extracted from the document text. Check against the original before service work.
| Item | Value | Also | PDF page |
|---|---|---|---|
| Intake socket bolts | 22 N·m | 16 ft·lb | p. 111 |
| Taining screws | 29 N·m | 21 ft·lb | p. 123 |
| Bolts 17 and 18 | 9 N·m | 80 in·lb | p. 128 |
| Facilitate further disassembly, fan nut | 47.5 N·m | 35 ft·lb | p. 154 |
| Cam Arm Pivot Nut | 5.6 N·m | 50 in·lb | p. 185 |
| Cam arms | 5.6 N·m | 50 in·lb | p. 185 |
| Retaining screw | 68 N·m | 50 ft·lb | p. 188 |
| Castellated nut of upper sprocket | 53 N·m | p. 211 | |
| TA. nut | 7 N·m | 62 in·lb | p. 279 |
| Retaining screw | 48 N·m | 35 ft·lb | p. 293 |
| Jam nuts | 18 N·m | 159 in·lb | p. 301 |
| Magneto Ring Nut | 105 N·m | 77 ft·lb | p. 322 |
| ENGINE COLD Crankcase Nuts or Screws | 10 N·m | 7 ft·lb | p. 322 |
| Crankcase/Engine Support Nuts or Screws | 40 N·m | 29 ft·lb | p. 322 |
| Cylinder Head Nuts | 22 N·m | 16 ft·lb | p. 322 |
| Axial Fan Shaft Nut | 48 N·m | 35 ft·lb | p. 323 |
| Crankcase/Cylinder Nuts or Screws N.A. N.A | 48 N·m | 35 ft·lb | p. 323 |
| Crankcase/Engine Support Nuts or Screws | 39 N·m | 29 ft·lb | p. 324 |
| ENGINE COLD Crankcase Nuts or Screws | 35 N·m | 26 ft·lb | p. 324 |
| Crankcase/Cylinder Nuts or Screws N.A | 29 N·m | 21 ft·lb | p. 324 |
| Hose pincher Manifold Screw | 35 N·m | p. 450 | |
| Hose pincher Manifold Screw | 29 N·m | 21 ft·lb | p. 450 |
| Rubber mount/support screw | 37 N·m | p. 450 | |
| Removable side member screws | 7 N·m | p. 450 | |
| Shaft support | 15 N·m | 133 in·lb | p. 450 |
| Water pump housing screws | 10 N·m | p. 460 | |
| Fuel level sensor retaining screws | 1 N·m | p. 501 | |
| Fuel Level Sensor Screws | 2.5 N·m | p. 501 | |
| TECHNICAL DATA. screws | 10 N·m | 89 in·lb | p. 511 |
| Castellated nut of upper sprocket | 60 N·m | p. 526 | |
| Taining screws | 59.7 N·m | 44 ft·lb | p. 526 |
| 4, Upper Sprocket Castellated Nut | 74.6 N·m | 55 ft·lb | p. 528 |
| ENGINE COLD Crankcase Nuts or Screws | 40 N·m | 29 ft·lb | p. 610 |
| Cylinder Head Nuts | 29 N·m | 21 ft·lb | p. 610 |
| Crankcase/Cylinder Nuts or Screws | 29 N·m | 21 ft·lb | p. 610 |
| Guard | 35.3 N·m | 26 ft·lb | p. 733 |
| Rubber mount/support nuts | 37 N·m | p. 733 | |
| Drive belt | 37 N·m | 27 ft·lb | p. 733 |
| Assembly, cylinder head screws | 29 N·m | p. 741 | |
| Distance from center of reed valve block | 12 N·m | p. 741 | |
| 593 engine equipped models | 16 N·m | p. 806 | |
| Nut and Governor Cup locking nuts | 10 N·m | 89 in·lb | p. 808 |
| Crankcase/Engine Support Nuts or Screws | 35 N·m | 26 ft·lb | p. 905 |
| Crankcase/Engine Support Nuts or Screws | 9 N·m | 7 ft·lb | p. 906 |
| Crankcase/Engine Support Nuts or Screws | 29 N·m | 21 ft·lb | p. 906 |
| Ed hole and stud | 15 N·m | 133 in·lb | p. 1099 |
| Lock nut | 15 N·m | 133 in·lb | p. 1101 |
| Cylinder Head Screws | 24 N·m | 18 ft·lb | p. 1113 |
| Axial Fan/Flywheel Nut | 24 N·m | 18 ft·lb | p. 1113 |
| Crankcase Screws | 12 N·m | 9 ft·lb | p. 1113 |
| Axial Fan/Flywheel Nut | 75 N·m | 55 ft·lb | p. 1113 |
Spark plugs
Values extracted from the document text. Check against the original before service work.
| Item | Value | Also | PDF page |
|---|---|---|---|
| Spark plug | 1 mm | p. 114 | |
| BR9ES | — | p. 237 | |
| BR8ES | — | p. 610 |
Get the document
The full file is delivered by the bot. Free owner guides for Ski-Doo are also available from the manufacturer.
Open in Telegram — the bot finds this document by its catalog id and sends the file.
Open in bot- Official free Ski-Doo owner's manualsParts catalogueAll manuals