Ski-Doo Manual

Ski-Doo · manual · 43 pages

Technical data

Numbers below were extracted automatically from the document. Verify them against the original manual before you order parts or apply torque.

Values extracted from the document text. Check against the original before service work.

Item	Value	Also	PDF page
Primary air intake silencer	33 ± 3 N·m		p. 7
Engine Supports	24.5 ± 3.5 N·m		p. 7
Engine Rubber Mounts	31.5 ± 3.5 N·m		p. 9
Engine support screw	31.2 ± 4.07 N·m	23 ft·lb	p. 9
Engine rubber mount	24.5 ± 3.5 N·m		p. 9
Ground cable screw	10.1 ± 2.03 N·m	89 in·lb	p. 9
Engine rubber mount	10 ± 2 N·m		p. 10
Housing	1.25 ± 0.25 N·m		p. 17
Air filter screws	1.2 ± 0.23 N·m	11 in·lb	p. 17
Secondary air intake	1.25 ± 0.25 N·m		p. 19
Silencer screws	1.2 ± 0.23 N·m	11 in·lb	p. 19
Exhaust System	45 ± 2 N·m		p. 23
Muffler retaining screw	7 ± 1.02 N·m	62 in·lb	p. 26
Exhaust	28 ± 1 N·m		p. 32
Pipe screw	28 ± 1 N·m		p. 32
Exhaust Gas	45 ± 2 N·m		p. 33
Temperature Sensor	44.7 ± 2.03 N·m	33 ft·lb	p. 33
Oetiker clamp	1.75 ± 0.25 N·m		p. 34
EPS retaining screw	1.7 ± 0.23 N·m	15 in·lb	p. 34
K40 x 16 Torx screw	1.5 ± 0.45 N·m	13 in·lb	p. 43

The full file is delivered by the bot. Free owner guides for Ski-Doo are also available from the manufacturer.

Open in Telegram — the bot finds this document by its catalog id and sends the file.

Open in bot