Ski-Doo Manual
Ski-Doo · manual · 709 pages
Technical data
Numbers below were extracted automatically from the document. Verify them against the original manual before you order parts or apply torque.
Tightening torque
Values extracted from the document text. Check against the original before service work.
| Item | Value | Also | PDF page |
|---|---|---|---|
| Coolant hose at front of coolant reservoir | 35 N·m | 26 ft·lb | p. 105 |
| Manifold screws M6 | 10 N·m | 89 in·lb | p. 105 |
| Assembly, cylinder head screws | 29 N·m | p. 114 | |
| Exhaust manifold bolts | 23 N·m | 17 ft·lb | p. 114 |
| Fuel level sensor retaining screws | 1 N·m | p. 162 | |
| Fuel Level Sensor Screws | 2.4 N·m | 21 in·lb | p. 162 |
| Locking nut | 10 N·m | 89 in·lb | p. 173 |
| Locking nuts | 10 N·m | 89 in·lb | p. 177 |
| 4, Upper Sprocket Castellated Nut | 74.6 N·m | 55 ft·lb | p. 196 |
| Ground cable connecting bolt | 11 N·m | p. 220 | |
| Idler wheel retaining screws | 48 N·m | 35 ft·lb | p. 255 |
| Crankcase/Engine Support Nuts or Screws | 35 N·m | 26 ft·lb | p. 282 |
| ENGINE COLD Crankcase Nuts or Screws | 9 N·m | 7 ft·lb | p. 282 |
| ENGINE COLD Crankcase Nuts or Screws | 29 N·m | 21 ft·lb | p. 282 |
| Crankcase/Cylinder Nuts or Screws | 29 N·m | 21 ft·lb | p. 282 |
| Intake socket bolts | 22 N·m | 16 ft·lb | p. 420 |
| Manifold Screw | 35 N·m | p. 427 | |
| Guard | 35.3 N·m | 26 ft·lb | p. 427 |
| Manifold Screw | 29 N·m | 21 ft·lb | p. 427 |
| Rubber mount/support nuts | 37 N·m | p. 427 | |
| Drive belt | 36.6 N·m | 27 ft·lb | p. 427 |
| Facilitate further disassembly, fan nut | 47.5 N·m | 35 ft·lb | p. 463 |
| Fuel Level Sensor Screws | 2.8 N·m | 25 in·lb | p. 502 |
| M8 bolts | 24 ± 4 N·m | 17 ft·lb | p. 581 |
| M5 bolts | 5 ± 0.5 N·m | 44 in·lb | p. 581 |
| Large terminal nut | 7 N·m | 62 in·lb | p. 582 |
| Crankcase/Engine Support Nuts or Screws | 40 N·m | 30 ft·lb | p. 662 |
| Cylinder Head Screws | 21.5 N·m | 16 ft·lb | p. 662 |
| Axial Fan Shaft Nut | 48 N·m | 35 ft·lb | p. 662 |
| Crankcase/Engine Support Nuts | 21.5 N·m | 16 ft·lb | p. 663 |
| Ring End Gap | 22 N·m | 16 ft·lb | p. 667 |
| Magneto Ring Nut | 125 N·m | 92 ft·lb | p. 667 |
| Ring End Gap | 125 N·m | 92 ft·lb | p. 667 |
| Ring End Gap | 9 N·m | 7 ft·lb | p. 667 |
| Ring End Gap | 29 N·m | 21 ft·lb | p. 667 |
| Ring End Gap | 35 N·m | 26 ft·lb | p. 667 |
| Crankcase/Cylinder Nuts or Screws | 40 N·m | 29 ft·lb | p. 667 |
| Ring End Gap | 40 N·m | 29 ft·lb | p. 667 |
| ENGINE COLD Crankcase Nuts or Screws | 35 N·m | 26 ft·lb | p. 670 |
| Crankcase/Cylinder Nuts or Screws | 35 N·m | 26 ft·lb | p. 674 |
Spark plugs
Values extracted from the document text. Check against the original before service work.
| Item | Value | Also | PDF page |
|---|---|---|---|
| BR9ECS | — | p. 210 | |
| Spark plug | 1 mm | p. 424 | |
| BR9ES | — | p. 662 | |
| S21 | — | p. 695 |
Get the document
The full file is delivered by the bot. Free owner guides for Ski-Doo are also available from the manufacturer.
Open in Telegram — the bot finds this document by its catalog id and sends the file.
Open in bot- Official free Ski-Doo owner's manualsParts catalogueAll manuals