Ski-Doo Steering System Gen4 2019 Manual

Ski-Doo Steering System Gen4 · 2019 · manual · 22 pages

Technical data

Numbers below were extracted automatically from the document. Verify them against the original manual before you order parts or apply torque.

Tightening torque

Values extracted from the document text. Check against the original before service work.

ItemValueAlsoPDF page
Jam nut18.5 ± 3.5 N·m164 in·lbp. 7
Runner nut8 ± 1.02 N·m71 in·lbp. 8
Ski nut47.5 ± 5.42 N·m35 ft·lbp. 9
Adjusting knob screw9 ± 1.02 N·m80 in·lbp. 12
Adjusting knob screw24.5 ± 3.5 N·mp. 12
Indicator screw9 ± 1.02 N·m80 in·lbp. 12
Indicator screw24.5 ± 3.5 N·mp. 12
Multifunction switch2.4 ± 0.2 N·mp. 15
Master cylinder clamp9 ± 1 N·mp. 15
Emergency stop switch2 ± 0.5 N·mp. 16
Support retaining screws2 ± 0.45 N·m18 in·lbp. 16
Throttle lever housing1.9 ± 0.1 N·mp. 16
Handlebar clamps screws24.5 ± 3.5 N·mp. 17
Clamp screws24.4 ± 4.07 N·m18 ft·lbp. 17
Outer tie-rod end nut47.5 ± 5.42 N·m35 ft·lbp. 20
Outer tie-rod end nut24.5 ± 3.5 N·mp. 20
Inner tie-rod end nut24.4 ± 4.07 N·m18 ft·lbp. 20
Upper steering column12.5 ± 2.5 N·mp. 21
Support nut12.5 ± 2.49 N·m111 in·lbp. 21
Lower steering column23.5 ± 3.5 N·mp. 21
Support nut23 ± 4.07 N·m17 ft·lbp. 21

Get the document

The full file is delivered by the bot. Free owner guides for Ski-Doo are also available from the manufacturer.

Open in Telegram — the bot finds this document by its catalog id and sends the file.

Open in bot