Ski-Doo RTX22 ETEC Pdf 2022 Manual
Ski-Doo RTX22 ETEC Pdf · 2022 · manual · 261 pages
Technical data
Numbers below were extracted automatically from the document. Verify them against the original manual before you order parts or apply torque.
Tightening torque
Values extracted from the document text. Check against the original before service work.
| Item | Value | Also | PDF page |
|---|---|---|---|
| Transmission | 16 ± 1.02 N·m | 142 in·lb | p. 52 |
| Transmission | 15 ± 1 N·m | p. 52 | |
| Water pump cover | 11 ± 0.8 N·m | p. 59 | |
| Bearing carrier screws | 5 ± 0.34 N·m | 44 in·lb | p. 64 |
| Taptite screws | 6 ± 0.7 N·m | p. 64 | |
| Coolant hose clamp | 5.5 ± 0.45 N·m | 49 in·lb | p. 66 |
| CPS retaining screws | 8 ± 0.45 N·m | 71 in·lb | p. 70 |
| Retaining screw | 125 ± 9 N·m | p. 74 | |
| Magneto housing | 7 ± 0.5 N·m | p. 75 | |
| Starter mounting screws | 11 ± 0.8 N·m | p. 80 | |
| SERVICE PRODUCT screw | 2.7 ± 0.68 N·m | 24 in·lb | p. 80 |
| Retaining nut | 4 ± 0.3 N·m | p. 93 | |
| RAVE valve housing | 10 ± 0.7 N·m | p. 97 | |
| Collar nuts | 4 ± 0.34 N·m | 35 in·lb | p. 98 |
| Bracket | 20 ± 2 N·m | p. 99 | |
| RAVE cable lock nut | 20.3 ± 1.36 N·m | 15 ft·lb | p. 99 |
| Counter nut | 20 ± 2 N·m | p. 99 | |
| Snap ring | 20.3 ± 1.36 N·m | 15 ft·lb | p. 99 |
| RAVE cable lock nut | 5 ± 0.6 N·m | p. 99 | |
| Retaining plate screw | 5 ± 0.56 N·m | 44 in·lb | p. 99 |
| REED VALVES Reed valve blade screws | 1.5 ± 0.3 N·m | p. 106 | |
| Intake adapter retaining | 6 ± 0.4 N·m | p. 107 | |
| SEQUENCE Cylinder Block Base Gasket | 50 ± 1.5 N·m | p. 113 | |
| Cylinder block screws | 50.2 ± 1.36 N·m | 37 ft·lb | p. 131 |
| Oil seal cover screws | 11 ± 0.79 N·m | 97 in·lb | p. 144 |
| M8 Crankcase screws | 29.8 ± 1.36 N·m | 22 ft·lb | p. 158 |
| Oil catch tank screw | 7.5 ± 1.02 N·m | 66 in·lb | p. 179 |
| Oil pump screw | 1.8 ± 0.23 N·m | 16 in·lb | p. 180 |
| Retaining ring | 25 ± 1 N·m | p. 187 | |
| Wave shim support retaining screws | 24.4 ± 1.36 N·m | 18 ft·lb | p. 187 |
| Retaining ring | 11 ± 0.79 N·m | 97 in·lb | p. 187 |
| Fuel hose retainer screw | 5 N·m | 44 in·lb | p. 217 |
| Adapter plate clamps | 0.7 ± 0.1 N·m | p. 224 | |
| Throttle body clamps | 1.5 ± 0.02 N·m | 13 in·lb | p. 224 |
| TPS retaining screw | 4 ± 0.45 N·m | 35 in·lb | p. 226 |
| Spark plug | 23 ± 1.36 N·m | 17 ft·lb | p. 234 |
| Ignition coil retaining | 2.4 ± 0.2 N·m | p. 237 | |
| Ground cable screw | 8 ± 0.45 N·m | 71 in·lb | p. 244 |
| Knock sensor screw | 24.4 ± 1.36 N·m | 18 ft·lb | p. 256 |
Get the document
The full file is delivered by the bot. Free owner guides for Ski-Doo are also available from the manufacturer.
Open in Telegram — the bot finds this document by its catalog id and sends the file.
Open in bot- Official free Ski-Doo owner's manualsParts catalogueAll manuals